看了干法TOC測定儀器的用戶又看了
留言詢價
虛擬號將在 180 秒后失效
使用微信掃碼撥號
德國耶拿幾十年來不斷推出**技術潮流的總量分析和元素分析儀器。憑借可追朔到19世紀的分析儀器制造傳統，以及從不停歇的創新腳步， 德國耶拿2010年又推出了multi N/C ®系列全新升級產品?；诙囗梽?chuàng)新的**，multi N/C ®系列產品與您分享更加專業、可靠的分析技術。
multi N/C ® 濕法系列的特殊性能：
1. 寬范圍全量程分析。NDIR檢測器無需稀釋，精確測量。主要得益于其**的高聚焦非色散紅外
2. VITA®**技術。**的VITA®**流速控制信號處理技術，全方位提高儀器性能，保證高精確的穩定測量結果
3. Easy Cal®.**技術。輕松校正功能，只需一個標準溶液即可完成校正，并長期穩定
4. 自動保護功能。高效測量與系統自清潔的**結合，自動監測各項系統參數
5. SCS安全自檢系統，**程度保證操作者和儀器的安全
6. **的消解系統。濕法消解的雙波長高強度紫外燈，是完整消解的保障
7. 多參數快速測定。TC， TOC， NPOC， TIC， POC 各項參數均可快捷準確的測量模塊化設計。
8. 配置靈活，自動化程度高，滿足不同用戶的需求
Consumables
multi N/C series
effective from 01.01.2010
Priority Order number Description
CONSUMABLES TOC
( all types of instruments )
A 402-810.047 Special catalyst multi N/C， one filling， 40 g
recommended for multi N/C 3000/3100
A 402-810.048 Special catalyst platinum， one refill
multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S
A 402-810.050 Halogen absorber filling (copper- and brass wool)
Consumables multi N/C series
Analytik Jena AG， 15.12.2009 2 / 22 effective from 01.01.2010
B 402-810.058 Special catalyst multi N/C， 200 g
recommended for multi N/C 3000/3100
B 402-810.059 Special catalyst platinum， sufficient for 5 refills
multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S
A 402-825.044 Quartz wool， 1 packet
A 402-825.150 U-tube， o.d. = 11 mm， without filling for halogenabsorber
( without connections )
A 402-881.006 Quartz glass cullet， coarse grains， packet of 80 g
A 402-881.228 Disposable retention filter (water trap) A 402-881.229 TC prefilter (aerosol trap)
402-881.245 Set of TC prefilter and water trap
A 402-885.017 High-temperature mat， set of 3 pieces
B 402-885.019 Halogen absorber， complete with U-tube
multi N/C 2100 and multi N/C 2100 S multi N/C 2100 WEARING MATERIAL
B 402-000.008 Stirring magnets， 15 mm x 6 mm， 10 pieces
A 402-520.137 Glass screw joint (gray)
A 402-815.058 Lab-type screw joint D 3.2 - GL 14， complete (red)
A 402-815.102 O-rings for combustion tube， set of 3 pieces
B 402-815.138 Dosing syringe for phosphoric acid， 5 ml
402-815.819 O-ring; 15.5 mm x 2.5 mm; Viton IC-vessel N/C 2100 S ( Stopper )
A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
A 402-825.041 Fork-type clamp KS 13/2 with clamping screw
A 402-881.026 Finger-Tight-Set 1/8" for tube set， PEEK
A 402-881.027 Finger-Tight-Set 1/16" for tube set， PEEK
A 402-881.238 Septa for pneumatic heads， 10 mm o.d.， set of 10 pieces
multi N/C 2100: only for N/C 2100 S
A 402-884.005 Pump hose for peristaltic pump， waste
A 402-885.010 Combustion tube
A 402-885.011 Pump hose for H3PO4 pump
B 402-886.303 Syringe 100 μl with vent and removable needle 0.63 mm x
0.35 mm (only for APG 60)
B 402-886.304 Syringe 250 μl with vent and removable needle 1 mm x 0.7 mm (only for APG 60)
A 402-886.305 Syringe 500 μl with vent and removable needle 1 mm x 0.7
mm (only for APG 60)?
A 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes， 3 pieces
multi N/C 2100: only for multi N/C 2100 S
A 402-886.310 Septum for syringe (autosampler); 9.5 mm o.d.; 1 piece
B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection
A 402-886.314 Septa pre-cut for septum-head， 11 mm， 3 pieces
A 402-886.317 Condensing loop multi N/C 2000/2100/2100 S
B 402-886.318 Sample vials， 8 ml
50 mm x 18 mm， 125 pieces multi N/C 2100: for APG 60-sampler multi N/C 2100 S: for APG 60-sampler
A 402-889.050 Septum; 12.5 mm; set of 5 pieces
multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul
B 402-889.091 Lids for sample vials， 2 ml， set of 500 pieces
B 402-889.092 Sample vials， 2 ml， set of 100 pieces
( for sample rack with 112 positions )
402-890.100 IC condensing vessel multi N/C 2100
A 402-890.110 tubing kit for multi N/C 2100 S
A 402-890.111 tubing kit for multi N/C 2100
B 402-890.113 needle with luer connector for H3PO4-syringe 402-890.150 IC condensing vessel multi N/C 2100 S
WEARING MATERIAL Double Furnace Solids Module
402-889.674 Quartz boat， 40 mm x 9 mm， set of 10 pieces
A 402-890.103 Furnace sealing plug
A 402-890.104 Solid combustion tube
A 402-890.105 Hook
A 402-890.106 Guidance tube
402-890.107 Gasket for oxygen lock
A 402-890.108 Gas transfer tubing， adapter with ball joint
A 402-890.109 O2 tubing
multi N/C 3100 multi N/C 3100 WEARING MATERIAL
B 402-000.005 Sample vials， 80 mm x 33 mm， 70 pieces
multi N/C 3100: for dilution rack APG 64
B 402-000.008 Stirring magnets， 15 mm x 6 mm， 10 pieces
A 402-520.135 Fork-type clamp for oxygen supply
A 402-520.137 Glass screw joint (gray)
A 402-815.058 Lab-type screw joint D 3.2 - GL 14， complete (red)
A 402-815.102 O-rings for combustion tube， set of 3 pieces
B 402-815.204 Septum silicon/PTFE， 24 mm， for screw cap EPA， set of
100 pieces
B 402-815.205 Screw cap for 40 ml EPA screw thread vial， set of 100 pieces
B 402-820.075 Bottle Insert
402-825.041 Fork-type clamp KS 13/2 with clamping screw
B 402-825.099 Sample vials for dilution rack， 100 mm x 16 mm， 10 pieces
B 402-825.119 Sample vessels for EPA Sampler with piercing function， set of 100 pieces
40 ml EPA screw thread vial
A 402-881.026 Finger-Tight-Set 1/8" for tube set， PEEK
A 402-881.027 Finger-Tight-Set 1/16" for tube set， PEEK
B 402-883.005 Sample aspiration
multi N/C 3100: also purge tube
A 402-884.005 Pump hose for peristaltic pump， waste
A 402-884.019 Injection tube
B 402-884.021 Waste hose with screw joint (2 m)
B 402-884.023 Lid for Bottle Insert
402-885.002 Condensation coil
A 402-885.010 Combustion tube
A 402-885.011 Pump hose for H3PO4 pump
A 402-885.016 Sample aspiration tube with screw joint
multi N/C 3100: also purge tube
B 402-886.319 Sample vials for APG 64-sampler， 78 mm x 28 mm， 100 pieces
A 402-889.050 Septum; 12.5 mm; set of 5 pieces
multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul
402-890.163 Piercing sample aspiration tube for EPA sampler， titanium
402-890.164 Piercing sample purge tube for EPA sampler， titanium
402-890.193 Tubing kit for multi N/C 3100
402-890.200 Condensation vessel
HT 1300
HT 1300 WEARING MATERIAL
402-815.830 Gasket for dust trap for HT furnace (34 mm x 4 mm)
A 402-825.044 Quartz wool， 1 packet
A 402-881.013 U-tube， o.d. = 21 mm for halogen absorber
A 402-881.203 Glass tube， straight， without connectors
A 402-881.213 Headline-Disposable-In-Line-Filter， box of 10 pieces
B 402-886.001 Ceran field for HT furnace
B 402-886.003 Connecting hose "Analyt" for HT furnace， 4 mm x 6 mm， 1 m long
B 402-886.004 Connecting hose "pump" for HT furnace， 4 mm x 6 mm， 1 m long
A 402-886.005 Connecting hose "oxygen supply" for HT furnace， 4 mm x
6 mm， 2 m long
B 402-886.006 Feeding tool for HT furnace
A 402-886.014 Ceramic combustion tube
B 402-886.114 Halogen absorber filling for straight tube A 402-886.116 Drying agent
A 402-886.118 Porcelain boat (white); 1，000 pieces
A 402-886.312 Halogen absorber filling for U-tube， o.d. = 21 mm
( conditioned )
402-886.322 Halogen absorber filling (conditioned)
for U-tube， o.d. = 21 mm， set of 5 pieces
Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components， spares and consumables.
Specifications and order numbers are subject to changes due to further technical development.
Prices are quoted exclusive of value added tax.
Purchase is subject to the General Terms and Conditions of Analytik Jena AG.
暫無數據！
干法TOC測定儀器的工作原理介紹？干法TOC測定儀器的使用方法？干法TOC測定儀器多少錢一臺？干法TOC測定儀器使用的注意事項干法TOC測定儀器的說明書有嗎？干法TOC測定儀器的操作規程有嗎？干法TOC測定儀器的報價含票含運費嗎？干法TOC測定儀器有現貨嗎？干法TOC測定儀器包安裝嗎？
手機版：
工商已核實
