国产在线 | 日韩,疯狂做受xxxx高潮不断,影音先锋女人aa鲁色资源,欧美丰满熟妇xxxx性大屁股

豪邁集團子公司Fiberguide位于美國新澤西州Stirling市。Fiberguide是世界特種光纜、光纜系統和部件方面的**企業。自從1977年成立以來，F(xiàn)iberguide定位于“光纖解決方案公司”，在眾多應用領域為業界提供***的設計、產品開發、測試和量產服務。

主要應用領域包括：

激光輸送系統

光動力治療

眼科

過程控制

紫外光(UV)固化

照明反射

遠程遙感(紫外到紅外)

煙塵探測

Combined optical/CE arrays

傳感

組織脫離-燒灼

血管成形術

牙科

遠程照明

Custom GC arrays

壓力感應

拉曼散布和光譜學

消散波調整和感應

技術參數：

Multimode， step-index optical fibers offer the most efficient and flexible delivery of high power laser beams. The correct components should be selected for minimizing beam quality degradation and optimum robustness. Smaller fibers tend to produce less degradation to beam quality but the minimum usable fiber size is limited by the quality of the laser beam， focusing optic and the numerical aperture (N.A.) of the fiber. Selection of the appropriate fiber type is an important consideration because the characteristics of the output beam will enhance or degrade the utility of the fiber optic delivered beam for different applications. The other components of the beam delivery system also impact performance: High power handling requires high quality end face surface finish and specially designed connectors that can withstand heating which comes from the absorption of spurious reflections at the fiber end faces. The fiber optic delivery system allows the laser beam to be transmitted in a small， flexible cable and is ideal when the laser beam must be delivered along a complex path or processing requires complicated manipulation of the beam delivery optics.

主要特點：

Laser polished fiber ends

High power applications employ a high conductivity copper ferrule in the nose of the connector allowing for greater heat dissipation in event of scattered energy at tip

Heat sink designed to pull heat away from fiber by being thermally and mechanically connected to HP-SMA connector and allows for handling ruggedness， prevent bending of the fiber and maintain beam quality

HP-SMA (High Power) utilizes well type "air gap" ferrule technology that holds the fiber tip in air to eliminate energy absorbing materials at fiber end Cantilevered fiber end is able to accept very high powers

Smaller fiber diameters incorporate a pure fused silica sleeve at the tip to support fiber without addition of energy absorbing materials

Conservatively accommodates peak power densities of 1.3KW/mm2 for CW applications and 5MW/mm2 for pulsed applications

Incorporated into and designed into customer specific applications

Standard core diameters of 200pm to 1500pm

Numerical aperture (N.A.) of 0.12，0.22. 0.26， 0.37 and 0.39

Plastic Clad Silica (PCS)， Hard Clad Silica， Hard Coated Silica/Silica， and Polymer Coated Silica/Silica fiber in standard OH and low OH versions

Wide variety of sheathings/protective jackets