常州市森茂機械設備有限公司
已認證
常州市森茂機械設備有限公司
已認證
在密閉的夾層中通入熱能源(如熱水,低壓蒸汽或?qū)嵊停?,熱量?jīng)內殼傳給被干燥物料。在動力驅動下,罐體作緩慢旋轉,罐內物料不斷地混合,從而達到強化干燥的目的。物料處于真空狀態,蒸汽壓下降使物料表面的水份(溶劑)達到飽和狀態而蒸發了,并由真空泵及時排出回收。物料內部的水份(溶劑)不斷地向表面滲透、蒸發、排出,三個過程不斷進行,物料在很短時間內達到干燥目的。Let heat source (for example, low pressure steam orthermal oil) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shellUnder driving of power, the tank is rotated slowly and the raw material inside it is mixed
適用化工、制藥、食品等行業的粉狀、粒狀及纖維狀物
continuously. The purpose of reinforced drying can be realized;
料的濃縮、混合、干燥及需低溫干燥的物料(如生化制品等),更適用于易氧化、易揮發、熱敏性、強烈刺激、有毒性物料和不允許破壞結晶體的物料的干燥。
◆
The raw material is under vacuum. The drop of steam pressure makes the moisture
(solvent) at the surface of raw material reach the state of saturation and evaporate.
◆
It is suitable for the raw materials that need to concentrate, mixed The solvent will be discharged through vacuum and dried at low temperature (for example, biochemistry)
products pump and recovered in time. The inner moisture in chemical,
pharmaceutical and foodstuff industries. Particularly it is (solvent) of raw material will infiltrate, evaporate suitable for the raw materials that are easy to be oxidized,
volatilized and and discharge continuously. The three processes are
have night heat sensitivity and is toxic and not permitted to destroy its carried out unceasingly and the purpose of drying can
電機可根據用戶要求選配調速電機,轉速為0~6rpm; 1.以上技術參數物料比重按0.6g/cm計算,如超過,定貨時需提出; 2.用戶如需壓力容器證書,定貨時需提出;3.如內膽材料采用搪玻璃,定貨時需提出; 4.物料如為易燃易爆性,定貨時以實驗數據為準。
Speed adjusting motor of 0-6rpm might be chosen according to the user's requirements. The following aspects should be point out when to order:
. The above-mentioned parameters are calculated based on material density of 0.6g/cm . If it's over, please point out.
. If certificate for pressure vessel is required, please point out.
. If glass lining for interior surface is required, please point out.
If the material is explosive, or flammable, the calculation should be made according to trial result.
相關產品
更多
企業名稱
常州市森茂機械設備有限公司企業類型
有限責任公司(自然人投資或控股)信用代碼
91320402MA1W5HK920法人代表
湯產法注冊地址
常州市天寧區鄭陸鎮舜南村成立日期
2018-03-06注冊資本
1,080萬(元)有效期限
2018-03-06 至 無固定期限經營范圍
干燥設備、制粒設備、混合設備的研發、制造、銷售;機械零部件制造、加工;自營和代理各類商品及技術的進出口業務,但國家限定企業經營或禁止進出口的商品和技術除外。(依法須經批準的項目,經相關部門批準后方可開展經營活動)
400-810-0069轉6577
虛擬號將在 秒后失效
使用微信掃碼撥號