規格外形（長*寬*高）：
.功率（kw）：
.重量（kg）：
.看了Autolad3的用戶又看了
留言詢價
虛擬號將在 180 秒后失效
使用微信掃碼撥號
產品性能：
1. All the typical values are based on the 1.6mm specimen. Test method is according to IPC-TM-650.
2. All the typical values listed above are for your reference only and not intended for specification. Please contact Shengyi Technology Co., Ltd. for detailed information. All rights from this data sheet are reserved by Shengyi Technology Co., Ltd.
Explanation: C=Humidity conditioning, D=Immersion conditioning in distilled water, E=Temperature conditioning
The first digit following the letter indicates the duration of preconditioning in hours, the second digit the preconditioning temperature in ℃ and the third digit the relative humidity.
| Items | Method | Condition | Unit | Typical Value |
|---|---|---|---|---|
| Tg | 2.4.24.4 | DMA | ℃ | 185 |
| 2.4.25D | DSC | 180 | ||
| Td | 2.4.24.6 | 5% wt. loss | ℃ | 355 |
| T288 | 2.4.24.1 | TMA | min | 30 |
| T260 | 2.4.24.1 | TMA | min | 60 |
| Thermal Stress | 2.4.13.1 | 288℃, solder dip | - | >100s No Delamination |
| CTE (Z-axis) | 2.4.24 | Before Tg | ppm/℃ | 40 |
| After Tg | ppm/℃ | 210 | ||
| 50-260℃ | % | 2.4 | ||
| Dissipation Constant (1MHz) | 2.5.5.9 | C-24/23/50 | - | 4.9 |
| Dissipation Factor (1MHz) | 2.5.5.9 | C-24/23/50 | - | 0.018 |
| Volume Resistivity | 2.5.17.1 | C-96/35/90 | MΩ.cm | 8.12×108 |
| Surface Resistivity | 2.5.17.1 | C-96/35/90 | MΩ | 2.65×107 |
| Arc Resistance | 2.5.1 | D-48/50+D-0.5/23 | s | 135 |
| Dielectric Breakdown | 2.5.6 | D-48/50+D-0.5/23 | kV | 45+kV NB |
| Peel Strength (1Oz) | 2.4.8 | 288℃/10s | N/mm | 1.4 |
| Flexural Strength(LW/CW) | 2.4.4 | A | MPa | 560/440 |
| Water Absorption | 2.6.2.1 | E-1/105+D-24/23 | % | 0.08 |
| Flammability | UL94 | C-48/23/50 | Rating | V-0 |
| CTI | IEC60112 | A | Rating | PLC 3 |
暫無數據！
Autolad3的工作原理介紹？Autolad3的使用方法？Autolad3多少錢一臺？Autolad3使用的注意事項Autolad3的說明書有嗎？Autolad3的操作規程有嗎？Autolad3的報價含票含運費嗎？Autolad3有現貨嗎？Autolad3包安裝嗎？
手機版：
工商已核實
